|
|
|
|
|
1/3″ Waterproof One-cable Camera
WAT-400D2
WATEC CO.,LTD.
|
|
|
■Camera, housing, lens, cable & power supply in 1 package - all ready to install
■Water protection grade IPX8 (10m)
■Durable aluminum housing (stainless steel housing MTO)
■One cable system provides simple cable wiring
■Improved sensitivity, Min. illumination 0.005lx (was 0.15lx w/ 400D)
■Various function settings available to order (AE mode, white balance, gain control, BLC, etc.)
■Focal length selectable from f2.8 to f10.5 (f2.8: standard, other: MTO)
|
Specifications |
Model Number |
WAT-400D2(NTSC) |
WAT-400D2(PAL) |
Pick-up element |
1/3 inch interline transfer CCD image sensor |
Number of effective pixels |
976(H) x 494(V) |
976(H) x 582(V) |
Unit cell size |
5.4μm(H) x 7.4μm(V) |
5.0μm(H) x 6.25μm(V) |
Imaging system |
Ye, Cy, Mg, and G complementary color mosaic filters on chip |
Synchronizing system |
Internal |
Scanning system |
2:1 Interlace |
Video output |
Composite: 1.0 V(p-p) 75Ω(Unbalanced) |
Resolution (H) |
More than 650TVL (Center) |
Minimum illumination |
0.005 lx F1.2 (AGC ON=45dB, Shutter=OFF) |
S/N |
More than 52dB (AGC OFF=-3dB, γ≒0.45) |
AE mode |
Fixed |
|
EI |
1/60 - 1/100000 sec. |
1/50 - 1/100000 sec. |
White balance |
ATW |
AGC |
ON:-3 45dB |
Day/Night |
OFF |
Gamma characteristics |
γ≒ 0.45 |
Video level |
92.5IRE |
85IRE |
Noise reduction |
ON (2DNR) |
Wide dynamic range |
OFF |
Lens iris |
DC |
Back light compensation |
BLC |
Sharpness |
ON |
Defog |
OFF |
Privacy mask |
OFF |
Mirror image |
OFF |
Interface |
BNC (Composite Video, Power in) |
Power supply |
DC+15V±10% |
Power consumption |
1.8W (120mA) |
Operating temperature |
>-10 −- +50℃ |
Storage temperature |
-30 − +70℃ |
Operating / Storage humidity |
95% RH or less (Without condensation) |
Cable length |
3C-2V 10m (Max. 200m) |
Standard lens |
f=2.8mm F1.2 (f=2.8mm - 10.5mm F1.2 (2.8) Varifocal lens) |
Weight |
Approx. 900g |
Accessories |
Receiver (WAT-400RX2), Power supply adaptor, Conversion plug (TI-64) |
|
Dimensional outline drawing
|
|
|
|