|
|
|
|
|
WATEC 1/2.8″ Full HD Network Camera
WAT-2400
WATEC CO.,LTD.
|
|
|
■Customization flexible firmware (Required software can be included to the camera)
■1/2.8-inch 2M CMOS image sensor with high sensitivity
■Min. illumination 0.1 lx F1.2 (AGC HIGH=66dB, Shutter=OFF)
■PoE (IEEE802.3af) and 12V DC input
■H.264 Video compression format
■ONVIF® profile S compliant
|
Specifications |
Model Number |
WAT-2400 |
Pick-up element |
1/2.8 inch CMOS image sensor |
Number of effective pixels |
1994(H) x 1244(V) |
Unit cell size |
2.8μm x 2.8μm |
Imaging system |
RGB+W array mosaic filters on chip |
Synchronizing system |
Internal |
Scanning system |
Progressive |
Output size |
1920 x 1080, 1280 x 720 |
Max. frame rate |
30 fps |
Video compression |
H.264, MJPEG |
Minimum illumination |
0.1 lx F1.2 (AGC HIGH=66dB, Shutter=OFF) |
S/N |
More than 50dB (AGC OFF=0dB, γ=1.0) |
Function settings |
1/5 - 1/10000 |
AE mode |
Fixed |
1/5 - 1/10000 sec. (1/10000 sec. step) |
EI |
1/30 - 1/10000 sec. |
White balance |
ATW, PWB, MWB |
AGC |
ON:0 - 42dB |
MGC |
0 66dB (3dB step) |
Sharpness |
Level adjustable |
Lens iris |
DC |
ONVIF |
profile S |
Supported protocols |
TCP/IP, UDP/IP, RTP(UDP), RTP(TCP), RTCP, RTSP, NTP, HTTP, FTP, DHCP, DNS, TELNET, SSH, SNMP, ARP, ICMP, Bonjour |
Interface |
RJ45 (10BASE-T, 100BASE-TX), USB (High Speed / Full Speed), Auto iris, Power in |
Power supply |
PoE +48V, DC+12V±10% |
Power consumption |
5.4W/450mA (DC+12V), 5.6W/127mA (PoE+48V) |
Operating temperature |
-10 +40℃ |
Storage temperature |
-30 +70℃ |
Operating / Storage humidity |
95% RH or less (Without condensation) |
Lens mount |
CS mount (Back focus adjustable) |
Weight |
Approx. 195g |
Accessories |
WPDC12 (DC plug), Hex. wrench, Camera bracket, Clamp filter |
|
Dimensional outline drawing
|
|
■System Configuration
|
|
|
■Options
|
Model |
Product name |
Specifications |
Safety standard |
SWI12-12-N-P5 |
AC adaptor |
DC12V / 1.0A |
UL/cUL, PSE, FCC |
30CMA-R |
C-mount adaptor |
Mount:U1-32UN |
|
|
|
|